Monthly Archives: August 2018

How to Replace an Electrical Outlet

Any electrical project in your home should be taken seriously. But replacing an existing outlet is one of the most common projects a homeowner will take on by themselves. Here’s basic instructions on how to replace an 110V electrical outlet with 2 wires and 1 ground.

1. Turn off the power at the main circuit panel.

2. Unscrew the outlet cover and remove it.

3. Use a voltage tester to confirm that the circuit is receiving no electricity.

4. Unscrew the outlet and gently pull it and its wires away from the wall.

5. Locate the terminals and remove both the black and white wires. The black wire (live) is usually connected with a gold or brass screw. The white wire (neutral) is usually connected with a silver screw.

6. Remove the ground wire (typically green or copper).

At this point, you should be able to remove the old outlet and replace it with the new one.

Connect the ground wire, then the black & white wires to the same screws as were attached before. Fit the new outlet into the wall and rescrew into the electrical box. Reattach the outlet cover.

Remember, you want to attach everything exactly as it was before. If you fear a faulty memory, take notes or even a photo of what the wires look like attached.

Once you’ve surveyed your work and believe you are ready to be tested, turn the power back on at the main circuit panel. Hopefully your nice new electrical outlet is working properly, and you can pat yourself on the back.

Douthit Electrical has been providing Charlotte with quality electrical services since 1990. When you need help with your electrical service or installation, check out our money saving coupons and give us a call!


Written by:

What is a Short Circuit?

Going on a long trip? You are probably going to use your GPS or perhaps google map it to find the shortest distance you need to travel in order to arrive at your destination. Well, that is what electricity does!

Electricity must travel along its own roadway of circuits. If it finds a quicker way, just like us, it changes its normal route and detours. When that happens, a “short circuit” occurs.

A short circuit can be caused by many things. It can happen from destructive household pests, loose connections, or even insulation that has become damaged over time. There are many unseen home issues that can cause this.

When that happens, bare wires that should never have touched become instant short cuts for our electricity. This means too much power is moving across too short of a distance.  This causes more heat to be produced then was intended for our circuits and can lead to shocks, burns and/or fire.

Oftentimes a short circuit will lead to a circuit breaker constantly needing to be reset . Click here for our blog “Why does my breaker keep tripping.” A visual inspection of our home’s outlets, appliances and extension cords can sometimes offer information for a quick diagnosis.

Remember, a short circuit in your home can easily lead to fire. If you suspect a short circuit, give us a call to diagnose and remedy the problem. Douthit Electrical has been providing Charlotte with quality electrical services since 1990. When you need electrical service, check out our money saving coupons and give us a call!


Written by: