Gas dryers require very little electrical power. They use gas as their heating power source and their electrical needs are mainly to turn the drum. They typically use the same 120V amount of power as a small appliance.
Electric dryers are quite different. Electric power is converted to heat and has much more power needs. These require an electric outlet that is specifically for dryers and the extra power they need to run properly.
3 Prong vs. 4 Prong
If your previous dryer was older than 2000, then it may have very well been quite happy with the 3 prong outlet in your home. Since that time, many electrical safety advances have been made. That is reflected in the current electrical code that requires 4 slots in newer home 220V outlets. The extra slot was an added safety measure to add an additional neutral path to the circuit.
What do I do?
Douthit can update your outlet to the new safety standards. Just give us a call for an appointment.
But, if you would like to wait to change to a 4 prong outlet, you may be able to convert the dryer cord yourself.
Changing the Dryer Cord
We always recommend having a licensed electrician help you with your home’s electrical projects, but if you are feeling confident, here’s our suggested steps:
1. ALWAYS MAKE SURE THE DRYER IS UNPLUGGED.
2. There should be a metal plate covering the area on the back of the dryer where the cord attaches. Remove it and make sure to put those small screws where they won’t be lost.
3. You should now see a restraint that keeps the cord stable and helps to relieve the stress and strain of movement. Remove the restraint.
4. Disconnect the existing dryer cord
5. Connect the center wire of the new 3 prong cord to the center silver terminal.
6. You have 2 wires on the new cord that now need be attached. Attach these to the 2 terminals beside the silver terminal.
7. Reattach the restraint collar. This can be frustrating and can take a bit of patience. Slide the tab ends one at a time into the cord wire hole. When you’ve been able to match up the 2 halves and can get the screws to catch, you’re done with the hardest part. Tighten.
8. Replace the safety plate.
YOU MUST GROUND THE DRYER. Return the frame ground strap to the central terminal post (neutral).
All electrical home projects should be done carefully to ensure the safety of your home. Always err on the side of caution when dealing with electricity.
Douthit Electric has been providing Charlotte with quality electrical services since 1990. When you need electrical service or installation, check out our money saving coupons and give us a call!
Written by: admin+